If you run a construction or trades business and pay subtrades, CRA expects a record of every one of those payments. That record is the T5018, Statement of Contract Payments, and it works differently from the T4A slips most other businesses use for contractors: a different test for who files, a different threshold rule, a different deadline, and GST/HST included in the amount.
This guide is for general contractors, renovators and trades businesses in Canada. It covers who has to file, which payments count, when the return is due, what goes on each slip, what CRA charges if you're late, how to tell a subcontractor from an employee, and the WSIB and WCB clearances that belong in the same subcontractor file. There's a worked example with a full year of payments.
Short answer: If more than 50% of your business income comes from construction activities, you must report payments to Canadian-resident subcontractors for construction services on T5018 slips (or a listing with the same information). Under CRA's administrative policy, you issue a slip when your payments to a subcontractor in the reporting period total more than $500, not counting GST/HST, and the amount on the slip includes GST/HST and PST. Payments for goods only aren't reported. You choose a calendar-year or fiscal-period reporting period, and the return is due six months after the period ends: June 30 for a calendar-year reporter. If construction isn't your main business, use a T4A slip instead.
1. Who has to file T5018 slips: the 50% test
CRA's rule applies to an individual, partnership, trust or corporation involved in construction activities. You must issue a T5018 slip, or provide a listing or printout, if all of these apply:
- your primary source of business income is more than 50% from construction activities
- you paid Canadian-resident subcontractors for construction services performed inside or outside Canada
- the total you paid a subcontractor was more than $500, not including GST/HST
CRA's test for "primary source": if more than 50% of a business's income-earning activities are construction, its primary source of business income is construction. Income Tax Regulations s. 238 puts the same rule in law: the reporting requirement applies if the business income for the reporting period "is derived primarily from those activities".
What CRA treats as construction
The Regulation defines construction activities as "the erection, excavation, installation, alteration, modification, repair, improvement, demolition, destruction, dismantling or removal of all or any part of a building, structure, surface or sub-surface construction, or any similar property."
CRA's list of common construction activities includes, among others: air conditioning work, concrete pouring and finishing, demolition, drywalling, electrical work, excavating and grading, fencing, finish carpentry, framing, glass and glazing, hardwood flooring installation, heavy equipment rental with an operator, insulation, masonry, painting and decorating, plumbing, roofing and shingling, siding, sprinkler system work, swimming pool installation, and tile work. Personal homes and residences count as structures, so residential renovation is covered.
Heavy equipment rented without an operator is just a rental, not a construction activity.
When construction isn't your main business
Plenty of businesses pay for construction work without being in construction. CRA's own example: a natural gas company that builds pipelines is in gas transmission, not construction, so it doesn't have to report under the contract payment reporting system (CRA will accept a T5018 return if it sends one).
If construction isn't your primary source of business income, CRA says to report payments for services on a T4A slip (box 048, fees for services) instead, and to leave GST/HST out of that amount. A property management company that pays a roofer, or a retailer that pays for a store fit-out, is usually in this group.
| Your business | Construction share of business income (example) | Slip for subtrades you pay for services |
|---|---|---|
| General contractor or renovation company | Most or all | T5018 |
| Electrical or plumbing contractor that also sells some fixtures | Construction is more than 50% | T5018 |
| Property management company that hires trades for repairs | Less than 50% | T4A, box 048 |
| Retail store paying for its own renovation | Close to 0% | T4A, box 048 |
The middle column is illustrative. Apply the 50% test to your own income, and ask your accountant if you're close to the line.
2. What counts as a construction payment
Report
- Payments to Canadian-resident subcontractors for construction services provided inside or outside Canada.
- Amounts paid or credited, whether by cheque, cash, barter or offset against an amount owing. If you pay a subcontractor by bartering goods or services, the fair market value of what you bartered forms part or all of the amount to report.
Don't report
- Payments for goods only (materials bought from a supplier with no service).
- Payments to non-resident subcontractors for construction services: CRA says to use a T4A-NR slip.
- Wages to your employees: those go on T4 slips. If someone works for you as an employee and separately as a subcontractor, CRA says the employment income goes on a T4 and the subcontract work on a T5018.
- Services that aren't construction services. CRA's "Payments of fees for services" page gives bookkeeping, cleaning and legal services as examples of fees for services, which go in box 048 of a T4A slip (without GST/HST).
Mixed invoices: materials plus labour
Many subtrades supply and install. CRA's "Payments of fees for services" page says that under its administrative policy, a slip must be issued if the total annual service component of the mixed services and goods payments in the reporting period was more than $500 (not counting GST/HST) per subcontractor. You don't issue a slip if the payment relates only to goods. Once a slip is required, box 22 is the total amount of payments you made to that subcontractor in the period, including GST/HST and PST.
The bookkeeping rule that follows: code supply-and-install invoices to the subcontractor, not to materials, and keep the invoice that shows the labour. Otherwise your year-end subcontractor totals will miss the service component.
Joint cheques to a sub and its sub
Some general contractors write one cheque to a subcontractor and that subcontractor's own subtrade, to reduce the risk of liens. CRA says you report only the subcontractors you deal with directly. If you have a contract with a drywall company and it has part of the work done by a plastering company, you report the payment to the drywall company, and the drywall company reports its payment to the plasterer.
3. The reporting period and the deadline
You choose the reporting period: a calendar year or your fiscal period. Once you choose, you can't change it for later years unless the Minister authorizes it (Income Tax Regulations s. 238(3)).
The T5018 return is due six months after the end of the reporting period (s. 238(4)). That's different from T4 and T4A returns, which are due on the last day of February after the calendar year.
| Your T5018 reporting period ends | T5018 return due |
|---|---|
| December 31, 2026 (calendar year) | June 30, 2027 |
| March 31, 2027 (fiscal period) | September 30, 2027 |
| September 30, 2026 (fiscal period) | March 31, 2027 |
Three timing rules from CRA's "When to file information returns" page:
- If the due date falls on a Saturday, Sunday or public holiday recognized by CRA, the return is on time if CRA receives it, or it's postmarked, on or before the next business day.
- If your business stops operating, the due date is 30 days from the date it stops. If a partner or the sole proprietor dies, it's 90 days from the date of death.
- If a service bureau or bookkeeper files the return for you, you're still responsible for its accuracy and for filing on time.
Paid, not invoiced
CRA says amounts are reported on a T5018 slip for the year in which they're paid. That matters for holdbacks. In Ontario, the Construction Act (s. 22) requires each payer on a contract or subcontract under which a lien may arise to retain a holdback of 10% of the price of the services or materials as they're actually supplied. A holdback you release to a subcontractor in the next reporting period goes on next period's slip, not this one. Your subcontractor ledger needs to show payments by date paid, not by invoice date.
4. What goes on each slip
The T5018 return is the slips plus the T5018 Summary. CRA's T5018 slip page sets out the main boxes:
| Box or field | What to enter |
|---|---|
| Box 20, For the period ending | The last day of your reporting period in which the payment was made |
| Box 22, Construction subcontractor payments | Total payments to the subcontractor in the period, including GST/HST and PST where applicable |
| Box 24, Recipient's program account number or SIN | The subcontractor's 15-character program account number (for example 123456789RT0001), or their social insurance number |
| Recipient's name and address | The business or person you paid |
| Payer's program account number | Your 15-character account number (for example 123456789RZ0001), on your copy and CRA's copy only; don't put it on the copies you give subcontractors |
Other CRA rules for filling out the slips: report amounts in Canadian dollars and cents (convert foreign-currency payments); don't show negative amounts to correct an earlier year; leave empty boxes blank rather than writing "nil" or "N/A". If you have more than one payroll account, file a separate T5018 return for each, based on the account the payments were made from.
If you don't fill out T5018 slips, CRA lets you send a listing or printout of all payments to subcontractors instead, line by line in column format, with all the information the slip asks for, the summary information (including total payments to each subcontractor and the total number of subcontractors) and the signature of an authorized person.
To check whether a subcontractor's GST/HST number is valid, CRA points you to its GST/HST registry ("Confirming a GST/HST account number").
5. Penalties for filing late or on paper
Late filing
T5018 is on CRA's list of information returns for which a relieving administrative policy reduces the late-filing penalty for small filers. Each slip is an information return. The penalty is $100 or the amount from the table, whichever is more:
| T5018 slips filed late | Penalty per day (up to 100 days) | Maximum |
|---|---|---|
| 1 to 5 | Not based on days | $100 flat |
| 6 to 10 | $5 | $500 |
| 11 to 50 | $10 | $1,000 |
| 51 to 500 | $15 | $1,500 |
Source: CRA, "When to file information returns" (administrative policy table; larger bands omitted here). CRA also warns that a contractor who plans with subcontractors to avoid tax by concealing underground activity could face criminal prosecution, with fines and penalties of up to 200% of the tax they tried to avoid.
Filing on paper when you must file electronically
For returns filed on or after January 1, 2024, you must file T5018 returns electronically (Internet file transfer or CRA's Web Forms) if you have more than 5 information returns of that type for a calendar year (Income Tax Regulations s. 205.1). Filing on paper anyway can cost a penalty under Income Tax Act s. 162(7.02):
| T5018 slips filed in the wrong format | Penalty |
|---|---|
| 6 to 50 | $125 |
| 51 to 250 | $250 |
| 251 to 500 | $500 |
CRA's Web Forms application can file up to 100 slips from its website. If you have a place of business in Quebec, you may also have to file with Revenu Québec.
Worked example: a late return
Example figures, for illustration only. A contractor with a calendar-year reporting period files 12 T5018 slips for 2026 on paper, 30 days after the June 30, 2027 due date.
| Amount | |
|---|---|
| Late filing: 12 slips is the 11–50 band, $10 × 30 days | $300 |
| Paper filing with more than 5 slips: 6–50 band | $125 |
| Possible penalties | $425 |
Filing on time through Web Forms would have avoided both.
6. Employee or subcontractor?
A T5018 is only right if the person really is a subcontractor. CRA's guide RC4110 says the facts of the working relationship as a whole decide employment status. CRA first asks what the two parties intended, then checks that intent against the facts, including:
- the level of control you have over the worker's activities
- whether the worker or you provide the tools and equipment
- whether the worker can subcontract the work or hire assistants
- the degree of financial risk the worker takes
- the worker's responsibility for investment and management
- the worker's opportunity for profit
An employer that fails to deduct the required CPP contributions or EI premiums has to pay both the employer's and the employee's share, plus penalties and interest. If you're not sure, either you or the worker can ask CRA for a CPP/EI ruling, by June 29 of the year after the year in question.
For payments that do belong on a T5018, CRA says you don't withhold CPP, EI or income tax.
7. WSIB and WCB clearances: the other subcontractor check
The T5018 tracks what you paid a subcontractor. Workers' compensation clearances protect you from what a subcontractor owes. Both live in the same subcontractor file.
Ontario: WSIB clearance certificates
WSIB's policy for construction: a principal who directly retains a contractor to perform construction work must obtain a clearance certificate confirming the contractor is in good standing with WSIB, before the work begins, and keep a clearance in effect for the whole time the contractor is doing the work. Starting construction work without a clearance is an offence for both the principal and the contractor.
- Without a clearance, the principal may be liable for the contractor's payment obligations to WSIB, up to the value of the labour portion of the contract.
- A clearance is valid for up to 90 calendar days and is renewable.
- Principals and contractors must keep a record of clearances for at least three years from the date they were obtained.
- When a contractor hires a subcontractor, the contractor becomes the principal for that work and needs the subcontractor's clearance.
Alberta: WCB-Alberta clearance letters
WCB-Alberta says to get a clearance letter before you hire a contractor or subcontractor and again before you release payment. If you don't have a clearance letter and the contractor hasn't paid its premiums, you may be liable for those premiums. WCB-Alberta's policy limits a principal's liability to the actual labour provided on the contract, multiplied by the defaulting employer's premium rate, and says clearances for labour services are valid only for work performed in Alberta.
Other provinces have their own workers' compensation boards and rules; check with the board where the work is done.
Worked example: one year of subcontractor payments
Example figures, for illustration only. An Ontario general contractor (a corporation, HST registrant, calendar-year T5018 reporting period). All its income is from residential renovation. Payments made in 2026:
| Payee | What they supplied | Paid in 2026 (incl. 13% HST where charged) | Service component, before HST | T5018? | Box 22 |
|---|---|---|---|---|---|
| Framing company (corporation, HST-registered) | Framing labour | $45,200.00 | $40,000.00 | Yes | $45,200.00 |
| Electrician (sole proprietor, HST-registered) | Electrical work | $9,040.00 | $8,000.00 | Yes | $9,040.00 |
| Painter (sole proprietor, not registered, small supplier) | Painting | $3,000.00 | $3,000.00 | Yes | $3,000.00 |
| Concrete company | Supply and pour: $6,000 materials + $2,500 labour, plus HST | $9,605.00 | $2,500.00 | Yes (service component over $500) | $9,605.00 |
| Lumber yard | Materials only | $14,690.00 | $0 | No (goods only) | — |
| Handyman (sole proprietor) | Small repair | $450.00 | $450.00 | No (not over $500) | — |
| Site supervisor on payroll | Wages | — | — | No (T4) | — |
Result: 4 T5018 slips and one T5018 Summary for the period ending December 31, 2026, due June 30, 2027. Four slips is under the electronic-filing threshold, so paper is allowed, but CRA encourages electronic filing.
Two follow-ons from the same year:
- Holdback: the framing contract had $4,520 of holdback (including HST, example figure) released in March 2027. It's reported on the 2027 slip, because that's when it was paid.
- ITCs: the contractor can claim input tax credits on the HST it paid to registered subtrades for its commercial activities. CRA's input tax credit rules require your records to show each supplier's GST/HST registration number, which is another reason to collect it up front. The unregistered painter charged no HST, so there's nothing to claim on that payment. Under CRA's rules a business generally has to register for GST/HST once its taxable supplies go over $30,000 in a single calendar quarter or over four consecutive calendar quarters; until then it's a small supplier and doesn't have to register.
A chart of accounts for a contractor
| Account | Type | Notes |
|---|---|---|
| Contract revenue (by job or class) | Income | Job costing detail lives in the class or project field |
| Subcontractors: construction services | Cost of sales | Feeds the T5018 list. Code supply-and-install invoices here |
| Subcontractors: non-construction services | Expense | Bookkeeping, legal, cleaning: T4A list, not T5018 |
| Materials and supplies | Cost of sales | Goods only; not reported on slips |
| Equipment rental: with operator | Cost of sales | A construction activity for T5018 |
| Equipment rental: without operator | Cost of sales | A rental, not a construction service |
| Direct labour (wages) | Cost of sales | T4 employees only |
| Holdback receivable | Asset | Holdbacks your clients retain from you |
| Holdback payable | Liability | Holdbacks you retain from subtrades; release date drives the T5018 year |
| GST/HST payable and ITCs | Liability | |
| WSIB / WCB premiums payable | Liability | Reconciled to payroll |
Subcontractor file checklist
Collect these before the first payment to every subtrade, and keep them with the contract:
- Legal name and address, exactly as you'll put them on the slip.
- Business number with program account (RT) or SIN, for box 24. Collect a SIN only when there's no business number, and store it securely.
- GST/HST registration number, checked in CRA's GST/HST registry.
- WSIB clearance (Ontario) before work starts, renewed so one stays in effect while they work; or a WCB-Alberta clearance letter before hiring and before payment.
- Whether the subcontractor is resident in Canada (non-residents go on a T4A-NR, not a T5018).
- A note of whether their invoices are labour only, supply-and-install, or materials only.
And each month:
- Code every subcontractor payment to the right account and payee, by date paid.
- Reconcile holdback payable by subcontractor.
- Check that clearances on file haven't expired.
- Watch for anyone who looks like an employee (one client, your tools, your hours).
Where Outsource Bookkeeping fits
All figures come from our live pricing page. Prices shown are starting rates. Your final monthly price depends on how complex your books are, and we confirm it in writing after a free review, before you start.
| Starter | Standard | Enterprise | |
|---|---|---|---|
| Monthly price | $500/month | $650/month ($585/month billed annually) | Custom quote |
| Transactions | Up to 50/month | Unlimited | High-volume |
| Bank and credit card reconciliation | ✓ | ✓ | ✓ |
| Monthly reports | P&L and Balance Sheet | P&L, Balance Sheet and Cash Flow | Custom reporting |
| GST/HST filing | ✓ | ✓ | ✓ |
| Year-end package for your accountant | ✓ | ✓ | ✓ |
| Catch-up bookkeeping | — | Up to 3 months | — |
| CRA correspondence handling | — | ✓ | Full CRA audit support |
| Payroll processing | — | — | Included |
We also prepare provincial sales tax returns (BC PST, Saskatchewan PST, Manitoba RST and Quebec QST) and information slips (T4, T4A, T5 and T5018) where you need them. For construction clients, that means the T5018 slips and summary come from the same subcontractor ledger we reconcile every month.
For how we set up contractor books month to month, see our page on bookkeeping for construction and trades businesses.
What we don't do: we're a bookkeeping service, not a licensed public accounting firm. We don't prepare or file T2 or T1 income tax returns, and we don't perform audit, review or compilation engagements. Your CPA or tax preparer does that. We hand them a reconciled trial balance with subcontractor costs, holdbacks and job revenue already separated.
Who files your T2 or T1
If you already have a CPA or tax preparer, keep them. We send them the year-end package.
If you don't, we refer clients to Accounting Experts, a bookkeeping and tax preparation business in the GTA with an office in Mississauga. Disclosure: Accounting Experts is affiliated with Outsource Bookkeeping. You're free to use any accountant you like, and our service is the same either way.
- Incorporated contractor: corporate tax returns (T2)
- Sole proprietor tradesperson or subcontractor: small business tax, including the T2125 and T1
- The owner's own return: personal tax returns (T1)
Common mistakes we fix in contractor books
- Using T4A slips for subtrades when construction is more than half the business, or T5018 slips when it isn't.
- Leaving GST/HST out of box 22, the way a T4A box 048 amount is prepared.
- Coding supply-and-install invoices to materials, so the service component never reaches the subcontractor list.
- Reporting by invoice date instead of the year paid, especially for released holdbacks.
- Assuming the deadline is the end of February, like T4 and T4A. T5018 is six months after your reporting period.
- No business number or SIN on file for a subtrade until the slips are due.
- Paper-filing more than 5 slips.
- No current WSIB clearance or WCB clearance letter for a subcontractor when the work started or the payment went out.
Frequently asked questions
Official sources
Checked 20 November 2026.
- CRA, T5018 slip – Statement of contract payments
- CRA, T5018 Statement of Contract Payments (form)
- CRA, Payments of fees for services (T4A, T5018 and mixed goods and services)
- CRA, When to file information returns (due dates and late-filing penalties)
- CRA, How to file information returns (electronic filing)
- Income Tax Regulations, section 238 (Reporting of payments in respect of construction activities)
- Income Tax Regulations, section 205.1 (electronic filing)
- Income Tax Act, section 162 (penalties, including 162(7.01) and 162(7.02))
- CRA, RC4110 Employee or Self-employed
- CRA, Input tax credits (eligibility and supporting documents)
- CRA, When to register for and start charging the GST/HST
- WSIB, Clearance Certificate in Construction (Operational Policy Manual)
- WSIB, Questions and answers: Clearances
- WCB-Alberta, Clearance letters
- WCB-Alberta, Coverage for contractors and subcontractors
- WCB-Alberta, Policy 06-03 Part II Application 3, Premiums in Arrears
- Ontario, Construction Act, R.S.O. 1990, c. C.30, section 22 (holdbacks)
- Government of British Columbia, Provincial Sales Tax (PST)
- Government of Saskatchewan, Provincial Sales Tax
- Manitoba Finance, Retail Sales Tax
- Revenu Québec
This guide is general information, not tax advice for your situation. Whether your business passes the 50% test, and whether a payment is for goods or services, depends on the facts. Ask your accountant, or contact CRA, if you're unsure.
Curious what a finished month of books looks like? Flip through the sample below.
See the work before you buy it
This is what lands in your inbox by the 10th.
A 11-page management package and the matching Excel workbook — your P&L against industry targets, EBITDA with owner-pay scenarios, and a cash flow written in sentences. We walk you through a real one on a free call.
See what's insideIllustration of the Month at a Glance page
Need professional bookkeeping?
Outsource Bookkeeping delivers CRA-ready financial reports by the 10th of every month — flat rate, no surprises. See our pricing →